Ricoh PE-P1 - Page 138

Item Selections Remarks
The printer will exit the energy saver state
after this setting is changed.
Vertical (-15 to +15) step
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Bypass Tray
Horizontal
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Vertical
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Duplex Tray
Horizontal (-15 to +15) step
1.32mm per step. Range is -5mm to +5mm.
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Vertical (-15 to +15) step
0.24mm per step. Range is -3.6mm to
+3.6mm
If the machine settings are reset to the factory
defaults, this value does not change.
The printer will exit the energy saver state
after this setting is changed.
Fuser SC Reset
This button is for resetting an SC related with
the fusing errors.
Smart Organizing Monitor (Printer Model)
137
5