5 Operation Panel Board
This board controls the operation of the operation panel keys
and LEDs.
6 ID Chip Board This board relays the ID chip data of each AIO from/to the EGB.
7 PSU (Power Supply Unit)
This supplies DC power for the EGB, fusing unit and interlock
switches.
8 Main Switch This switch provides power to the machine.
9 Fusing Fan Motor This motor exhausts air around the fusing unit.
10 Interlock Switches
These switches turn off DC power when the front cover or top
cover is open.
11 LSU Fan Motor This motor exhausts air around the laser optics housing unit.
6. Detailed Section Descriptions
164
To Next Page
Loading...
