Ricoh Pro C901S - Page 102

*3
*3
*3
*3
BZH186
Punch
hole
position
Original orientation
Left 2
Top 2
Right 2
Left 3
Top 3
Right 3
*1
The above table shows punch hole positioning. Punched sheets might not be delivered in the orientation
shown in this table.
*2
You cannot make punch holes at this position when copying onto the following paper sizes: A3, B4 JIS,
11 × 17, 8
1
/
2
× 14, 8 × 13, 8
1
/
2
× 13, 8
1
/
4
× 13
*3
If you want to make punch holes at this position, select unreadable orientation in Original Orientation and
then select Top 2 or Top 3.
1. Press [Output/ Customize Function/ Finisher].
2. Press [Finisher].
3. Select one of the punch hole positions.
4. Press [OK].
2. Basic Copying
100
2