Ricoh Pro C901S - Copying Onto Thin Paper

4. Press [Program].
The confirmation screen appears.
5. Press [Exit].
6. Press [OK].
Recalling the registered custom size
Recalls the registered paper size.
1. Press [Program Custom Size].
2. Press [Recall].
The registered size is displayed.
3. Press [OK].
Copying onto Thin Paper
When copying onto thin paper, select the weight and size of paper.
1. Place paper print side up on the multi bypass tray (tray 7).
2. While pinching the release lever, adjust the side fences to the size of the paper.
Copying from the Multi Bypass Tray (Tray 7)
63
2