1. Press [Special Original].
2. Select [Mixed Sizes], and then press [OK].
3. Align the rear and left edges of the originals as shown in the illustration.
1. Place the originals into the ADF
4. Adjust the document guides to the widest original size.
5. Place originals in the ADF.
6. Press the [Start] key.
• For details about weights of paper that can be used with this mode and other relevant information,
see “Supplementary Information”.
• p.255 "Supplementary Information"
Thin Paper Mode
When copying thin paper originals, select Thin Paper mode.
1. Placing Originals
42
To Next Page
Loading...
