Combined Copying
This section describes how to make combined copies.
• When placing originals on the exposure glass, start with the first page to be copied. When placing
originals in the ADF, set the first page on top.
• When placing originals on the exposure glass or in the ADF using the Batch function, press the [ ]
key after all the originals have been scanned.
• If you selected [2 Sided] for Original or [Combine 2 Sides] for Copy, you can change the orientation.
See “Originals and Copy Orientation”.
• You can change the initial settings for Combine under Edit in User Tools. For details, see “Copier/
Document Server Feature”, General Settings Guide.
• p.80 "Originals and Copy Orientation"
One-Sided Combine
Combine several pages onto one side of a sheet.
There are six types of One-Sided Combine.
1 Sided 2 Pages Combine 1 Side
Copies two 1-sided originals to one side of a sheet.
1 Sided 4 Pages Combine 1 Side
Copies four 1-sided originals to one side of a sheet.
2. Basic Copying
82
To Next Page
Loading...
