*1
The above table shows Z-fold positions. The orientation of the paper does not indicate orientation of
delivery.
1. Select the folding direction.
2. Place the originals, and then press the [Start] key.
• You can specify the fold-back position in 1 mm (0.1 inch) increments under Z-fold Position in User
Tools.
• For details about which sizes and weights of paper that can be Z- folded, and the number of Z-folded
copies that can be stacked on the finisher trays, see “Specifications for Finisher SR5000” or
“Specifications for Booklet Finisher SR5020”, About This Machine.
Using the Z-fold support tray
When using the Z-fold function together with the Staple, Sort, or Stack function, attach the Z-fold support
tray to the upper tray or the shift tray of the finisher.
Finisher Shift Tray
Fit the hooks of the Z-fold support tray into the holes in the shift tray.
2. Basic Copying
102
To Next Page
Loading...
