4. Press [All Pages] or [1st Page Only] to select the print page.
5. After making all settings, press [OK].
6. Press [OK].
• When the Full Color is selected, the full color counter will advance by “1”.
• The default stamp color is black.
• You can change the settings for Preset Stamp under Stamp in User Tools. Depending on the setting,
density may change. For details about Stamp, see “Copier/Document Server Features”, General
Settings Guide.
Changing the stamp color
Changes the stamp color.
1. Press [Stamp Color] under Stamp Color.
2. Select the stamp color, and then press [OK].
Changing the stamp position, size, and density
Changes the stamp position, size, and density.
1. Press [Change] under Position / Size / Density.
4. Advanced Copying
164
To Next Page
Loading...
