To specify the area you want to erase, you must define the positions where the machine starts scanning
(X1, Y1) and where it stops scanning (X2, Y2) on the original. Measure the area you want to specify before
entering the area settings.
X1, X2: 0 432 mm (0 17 inches)
Y1, Y2: 0 432 mm (0 17 inches)
1. Press [Edit / Color].
2. Press [Erase].
3. Select one of the areas from [Erase Inside 1] to [Erase Inside 5].
Advanced Copier Functions
193
To Next Page
Loading...
