To specify the area you want to erase, you must define the positions where the machine starts scanning
(X1, Y1) and where it stops scanning (X2, Y2) on the original. Measure the area you want to specify before
entering the area settings.
X1, X2: 0 432 mm (0 17 inches)
Y1, Y2: 0 432 mm (0 17 inches)
1. Press [Edit / Color].
2. Press [Erase].
3. Press [Erase Outside].
4. Enter the length of [X1] with the number keys, and then press [ ].
5. Enter the length of [Y1] with the number keys, and then press [ ].
Advanced Copier Functions
195
To Next Page
Loading...
