1. Press [Cover/ Slip Sheet].
2. Press [Designate / Chapter].
3. Press [Designation Sheet Copy].
4. Enter the sheet number of the first original with the number keys.
5. Press [Page to Page].
6. Enter the sheet number of the last original with the number keys.
7. Select the designation sheet tray that contains the paper for the designation sheets, and then
press the [ ] key.
8. To specify another page location, repeat steps 4 to 7.
Up to 100 locations can be specified.
9. Select the main sheet tray that contains the sheet to copy the originals.
10. After making all settings, press [OK] twice.
• When this function is combined with Duplex, the first page of the designated pages is copied on the
front side of a designation sheet.
• The designation sheets should be the same size and orientation as the main sheet.
• To change the value you entered, press the key you want to change, and then enter a new value.
4. Advanced Copying
220
To Next Page
Loading...
