• Check the position of the index tab to avoid cropping the image.
• Align the image you want to copy by checking the position of the index tab. If the image extends
beyond the index tab, the backs of sheets may get soiled with toner.
• To copy onto tab stock from the multi bypass tray (tray 7), see “Copying onto Tab Stock from the
Multi Bypass Tray (Tray 7)”.
• When a paper jam has occurred, check the order of originals and tab stock, and then restart copying.
• p.65 "Copying onto Tab Stock from the Multi Bypass Tray (Tray 7)"
Surplus tab stock auto eject
When copying onto tab stock but not using all the tab stock for each copy, remaining sheets of tab stock
are automatically ejected.
Before using this function, specify the number of sheets of tab stock (Number of Tabs) in one set under Tray
Paper Settings.
For example, if you use three of five tabs that form a set in a tray and insert slip sheets using the Designate
function, the unused 4th and 5th tab sheets are automatically ejected when the first copy is complete.
• If you set [Number of Tabs] to [Off], surplus tab stock sheets for each copy are not ejected.
Basic Procedure
57
To Next Page
Loading...
