• In Sort mode, you can complete scanning and copying by copying the scanned pages stored in
memory until it becomes full, and then scanning and copying the remained originals.
Shift tray off in sort/stack
You can turn off the shift function when using the Sort or Stack function.
1. Press [Output/ Customize Function/ Finisher].
2. Press [Output/ Cstmz.], and then press [Sort/ Stack Shift Tray Off].
3. Press [OK].
Insert Separation Sheet
Use this function to have separation sheets inserted between sets or jobs.
• Before using this function, select the tray for separation sheet under Separation Sheet in Tray Paper
Settings.
Finishing
93
To Next Page
Loading...
