Ricoh Pro C901S - Page 98

Original orientation and stapling position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the staple positions is as
follows:
BZH185
Original orientation
Top 2
Left 2
Bottom 1
Slant
Top 1
Stapling
position
Top Right 1
Right 2
Center
*1
The above table shows staple positioning. The orientation of the paper does not indicate orientation of
delivery.
*2
You cannot staple at this position when copying onto the following paper sizes: A3, B4 JIS, 11 × 17,
8
1
/
2
× 14, 8 × 13, 8
1
/
2
× 13, 8
1
/
4
× 13
*3
If you want to staple at this position, select unreadable orientation in Original Orientation and then select
Top 2.
*4
If Booklet Finisher SR5020 is installed, you can select Center as the staple position.
2. Basic Copying
96
2