Ricoh R10 - Setting the White Balance Manually (Manual Settings)

113
Various Shooting Functions
1
1 Press the ADJ./OK button in shooting mode.
2 Press the ADJ./OK button #$ until the white balance
menu appears.
3 Press the button !" to select
[M].
4 Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5 Press the DISP. button.
• The white balance is set.
6 Press the ADJ./OK button.
• The symbol appears on the screen.
• The screen is displayed with the white
balance set in Step 5. If the result is
not as expected, repeat the steps to
change the settings as many times as
required.
Note ----------------------------------------------------------------------------------------------
To cancel [Manual Settings], select a setting other than [M] in Step 3.
Setting the White Balance Manually
(Manual Settings)
Move Slctn Ok
Manual Settings: Set