92
Various Shooting Functions
1
While a still image (16 frames in an image file) taken with S-Cont or
M-Cont is displayed, you can enlarge any one of the 16 frames. You
can also switch between frames while viewing the image in
enlarged display mode.
To view a frame from an S-Cont or M-Cont still image in enlarged
display mode, follow the steps below.
1
Press the 6 (Playback) button.
• The last file recorded is displayed.
2
Press the ADJ./OK button
!"#$ to display an S-Cont or
M-Cont still image.
3
Turn the zoom lever toward 8
(Enlarged View).
• The first frame of the consecutive
images is displayed in enlarged
display mode. The frame position bar
appears at the bottom of the screen.
• Press the ADJ./OK button #$ to
switch frames. To return to the 16-
frame display, press the ADJ./OK
button.
Note ----------------------------------------------------------------------------------------------
Press the DISP. button to switch between displaying the bar at the bottom of the screen,
displaying the grid guide, and hiding the display. (GP.60)
Viewing an S-Cont or M-Cont Still Image in
Enlarged Display Mode
To Next Page
Loading...
