75
Various Shooting Functions
1
Assigning [AE Lock] to the Fn (Function) button (GP.162) and
then pressing the Fn button during shooting allows you to lock or
cancel the exposure.
1
Turn the mode dial to 5 or SCENE.
2
Set [Set Fn Button] to [AE Lock] on the setup menu.
• For the operating procedure, see P.162.
3
Check that the camera is ready to shoot.
4
Put the subject of your photo in the center of the screen
and press the Fn button.
• The exposure is locked and the AEL
mark, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn button again cancels
the AE lock.
Note ----------------------------------------------------------------------------------------------
The AE lock function can only be used when [Time Exposure] is set to [Off].
Locking the Exposure (AE Lock)
To Next Page
Loading...
