154
Changing Camera Settings
5
(*)
The default setting varies depending on where you purchased the camera.
Note ----------------------------------------------------------------------------------------------
When the mode dial is set to easy shooting mode, the quantity and order of the items in
the setup menu are different from other shooting modes. The contents of the settings are
the same as other modes.
In easy shooting mode, [Set Fn Button] can be set to [Off], [Macro Trgt] or [Back.Comp.].
1
Press the MENU button.
• The shooting menu (or the playback menu) appears.
2
Press the ADJ./OK button $.
• The setup menu appears.
• In scene mode, press the ADJ./
OK button ! once or twice to
select the [MODE] tab, and then
press the ADJ./OK button $
twice. The setup menu appears.
3
Press the ADJ./OK button !"
to select the desired item.
• If the DISP. button is pressed at this
point, the display returns to the screen
shown in Step 2.
• Press the ADJ./OK button " at the
bottom item to display the next screen.
Date Settings P.181
Language/N
(*)
, English, Deutsch, Français, Italiano,
Español, , , ,
P.182
Video Out Mode
(*)
NTSC, PAL P.183
Using the Setup Menu
In the instructions of this manual, the menu selection is confirmed when you “Press the ADJ./
OK button” (as in Step 6 below), but you can also confirm the setting and return to the menu
screen by pressing the ADJ./OK button #.
Setting Options [Default Settings] Refer to
The menu items are provided
on five screens.
To Next Page
Loading...
