Ricoh R10 - Printing Still Images; Printing One or All Still Images

149
Direct Printing
4
You can print still images from the camera with a PictBridge-
compatible printer.
Still images are sent from the internal memory when no SD memory
card is loaded or from an SD memory card when one is loaded.
Caution------------------------------------------------------------------------------------------
Do not disconnect the USB cable during printing.
Note ----------------------------------------------------------------------------------------------
• If a [Printer Error.] message appears during image transfer, check the printer status
and take the appropriate action.
• If a computer connection message appears even though the camera is connected to
the printer, reconnect the camera and press the ADJ./OK button within 2 seconds.
1 Check that the printer is ready
to print.
• The [Connecting…] screen appears.
2 Press the ADJ./OK button.
• The Direct Print playback mode
screen appears.
3 Press the ADJ./OK button
!"#$ to select an image for printing.
4 Press the ADJ./OK button.
5 Press the ADJ./OK button !"
to select [1 File] or [All Files].
6 Press the ADJ./OK button.
• The Direct Print menu appears.
Printing Still Images
Printing One or All Still Images
Finish
All Files
1 File
Select