Ricoh R10 - Changing the ISO Auto-High Setting (ISO Auto-High)

164
Changing Camera Settings
5
You can change the upper limit of the ISO setting for [Auto-Hi] (Auto
high sensitivity setting) (GP.114) in [ISO Setting] on the shooting
menu.
1 Display the setup menu.
• For the operating procedure, see P.154.
2 Press the ADJ./OK button " to select [ISO Auto-High]
and press the button $.
3 Press the button !" to select
the desired setting.
4 Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
Images shot with a higher sensitivity may appear grainy.
Changing the ISO Auto-High Setting
(ISO Auto-High)
Available Settings
AUTO 400 *Default setting
AUTO 800
AUTO1600