Ricoh R10 - Changing the Operation Sound Volume (Vol. Settings)

167
Changing Camera Settings
5
The operation sound volume can be changed.
1 Display the setup menu.
• For the operating procedure, see P.154.
2 Press the ADJ./OK button " to select [Vol. Settings]
and press the button $.
3 Press the button !" to select
the desired setting.
4 Press the ADJ./OK button.
Note ----------------------------------------------------------------------------------------------
The level sound is not emitted, even when [Level Setting] is set to [Disp + Snd] or [Sound]
and [Vol. Settings] is set to [
  ] (Mute) (GP.172).
Changing the Operation Sound
Volume (Vol. Settings)
Available Settings
   (Mute)
   (Small)
   (Medium) *Default setting
   (Large)