Ricoh R10 - Setting the LCD Auto Dimmer Mode (LCD Auto DIM)

175
Changing Camera Settings
5
When [LCD Auto Dim] is set to [On], the picture display dims to
conserve battery power if the camera is not moved for
approximately five seconds. Move the camera or press any button
to return to the original picture display brightness. The default
setting is [On].
1 Display the setup menu.
• For the operating procedure, see P.154.
2 Press the ADJ./OK button " to select [LCD Auto Dim]
and press the button $.
3 Press the button !" to select
[On].
Caution------------------------------------------------------------------------------------------
The [LCD Auto Dim] setting is disabled in synchro monitor mode. (GP.60)
Setting the LCD Auto Dimmer Mode
(LCD Auto Dim)