Ricoh R10 - Using the Zoom Function

If you are using the camera for the first time, read this section.
37
1 With the camera ready to
shoot, turn the zoom lever
toward z or Z.
• You can check the zoom status on
the zoom bar of the picture display.
• Low speed zooming and high
speed zooming are available.
Turning the zoom lever just slightly
toward z operates the zoom at low speed. Turn the zoom lever
further to switch to high speed zooming.
2 Compose your picture and half-press the shutter
release button.
3 Full-press the shutter release button.
Using the Zoom Function
Turning the zoom lever toward z (Telephoto) allows you to take
a close-up picture of the subject.
Turning the zoom lever toward Z (Wide-angle) allows you to take
a wide-angle picture.
Wide-angle Telephoto