Ricoh R10 - Using the Backlight Compensation Function in Easy Shooting Mode (Back.comp.)

76
Various Shooting Functions
1
You can use the backlight compensation function when the main
subject looks too dark in situations such as shooting a dark subject
against a bright background.
Assigning [Back.Comp.] to the Fn (Function) button in easy
shooting mode (GP.162) and then pressing the Fn button during
shooting allows you to switch between on and off for the backlight
compensation function.
1 Turn the mode dial to EASY.
2 Set [Set Fn Button] to [Back.Comp.] on the setup menu.
• For the operating procedure, see P.162.
3 With the camera ready to
shoot, press the Fn button.
• The backlight compensation function
turns on and the symbol appears on
the screen.
• Pressing the Fn button again cancels
the backlight compensation function.
Note ----------------------------------------------------------------------------------------------
• [Back.Comp.] can only be set in easy shooting mode.
• [Back.Comp.] cannot be used during macro shooting.
Using the Backlight Compensation Function in
Easy Shooting Mode (Back.Comp.)