Ricoh R10 - Adjusting the Light Intensity of the Flash (Flash Expo. Comp.)

95
Various Shooting Functions
1
You can adjust the light intensity of the flash. You can set the light
intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.
1 Display the shooting menu.
• For the operating procedure, see P.81.
2 Press the ADJ./OK button " to select [Flash Expo.
Comp.] and press the button $.
• The flash exposure compensation bar appears.
3 Press the button !" to make
the setting.
4 Press the ADJ./OK button.
• The setting appears on the screen
except when the flash mode is set to
[Flash Off].
Note ----------------------------------------------------------------------------------------------
For information on how to use the flash, see P.41.
Caution------------------------------------------------------------------------------------------
Flash exposure compensation may not work outside the flash range (GP.41).
Adjusting the Light Intensity of the
Flash (Flash Expo. Comp.)
0 . 0
To Shoot
Ok