Ricoh R10 - Shifting the AE and AF Targets (Movetarget)

73
Various Shooting Functions
1
This function allows you to shift the target for the automatic
exposure (AE) and/or the auto focus (AF) without having to move
the camera when taking a picture. This function is the same as the
ADJ./OK button’s AE/AF target shift function. For more information,
see P.69.
1 Turn the mode dial to 5.
2 Set [Set Fn Button] to [MoveTarget] on the setup menu.
• For the operating procedure, see P.162.
3 With the camera ready to shoot, press the Fn (Function)
button.
• The target shift screen appears.
4 Press the ADJ./OK button
!"#$ to move the cross-
mark to the desired target
position.
5 Press the DISP. button.
6 Press the ADJ./OK button !"
to select the desired setting,
and then press the ADJ./OK
button.
• See P.69 for details about individual
settings.
• The target shift screen appears again.
• If [Off] is selected, the display returns
to the shooting screen.
7 If the cross-mark is aligned with the desired target
position, press the ADJ./OK button.
• Move the cross-mark if it is not aligned properly.
Shifting the AE and AF Targets (MoveTarget)
Select Ok
Ok
OFF
AE/AF
AF
AE