1st/2nd Message Problem/Solution
Hardware Problem, Wireless Card
Machine failed to access IEEE 802.11a/g board.
• Confirm that the board is installed correctly.
Invalid Data, Power Off On
Machine has received spurious data.
• Turn the printer off/on.
Invalid Password, Try again
The invalid password was entered and Locked Print or Saved
File Print is not applicable.
Invalid password entered, Locked Print or Saved File Print
cannot apply.
Printer displays this message for 4 sec., then returns to previous
display.
• Enter correct password.
Load Correct Size Paper/ Paper Size:,
Paper Type:
Size of paper selected does not match size selected with dial
on paper tray.
• Use the dial to select the correct paper size.
-or-
• Press [Form Feed].
Load Paper: Tray# or Form Feed
The specified tray is out of paper.
• Load paper in the specified tray.
Menu Protected, Cannot change
The operation panel has been digitally locked, settings cannot
be changed. Message displays for 5 sec., returns to previous
display.
Misfeed: Duplex Check paper size/
Open Duplex Unit cover
Paper fed from bypass tray jammed in duplex unit.
Misfeed: Internal, Check paper size/
Open Front Cover
Paper fed from bypass tray jammed in duplex unit.
Misfeed: Ppr, Exit Check paper size/
Open Paper Exit Cover
Paper fed from bypass tray jammed in duplex unit.
Misfeed: Ppr. Tray, Check paper size/
Pull out Tray
Paper is jammed in the duplex unit.
No Files exist
No files available for deleting or printing. This error displays
for 3 sec., then machine returns to previous display.
Error Messages
71
To Next Page
Loading...
