Safety and legal
99
A
Symbols for the main power switch A
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
Note
When you move the machine, grasp the side handholds that are under the scanner. Do NOT
carry the machine by holding it at the bottom.
IEC 60825-1:2007 Specification A
This machine is a Class 1 laser product as defined in IEC 60825-1:2007 specifications. The label
shown below is attached in countries where required.
Internal laser radiation A
Wave length: 780 - 800 nm
Output: 10 mW max.
Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
-
means POWER ON.
-
means POWER OFF.
This machine has a Class 3B Laser Diode which emits invisible
laser radiation in the Scanner Unit. The Scanner Unit should not
be opened under any circumstances.
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
To Next Page
Loading...
