Sending a fax
37
5
Sending in real time for all faxes 5
a Make sure you are in Fax mode  .
b Press  Menu, 2, 2, 5.
c Press a or b to choose On.
Press OK.
Sending in real time for the next fax 
only
5
a Make sure you are in Fax mode  .
b Press  Menu, 2, 2, 5.
c Press a or b to choose Next Fax:On.
Press OK.
Not sending in real time for the next 
fax only
5
a Make sure you are in Fax mode  .
b Press  Menu, 2, 2, 5.
c Press a or b to choose Next Fax:Off.
Press OK.
Overseas mode 5
If you are having difficulty sending a fax 
overseas due to a bad connection, then 
turning on the overseas mode may help.
This is a temporary setting, and will only be 
active for your next fax.
a Make sure you are in Fax mode  .
b Load your document.
c Press  Menu, 2, 2, 9.
d Press a or b to choose On or Off.
Press OK.
Delayed fax 5
You can store up to 50 faxes in the memory 
to be sent within a twenty four hour period.
a Make sure you are in Fax mode  .
b Load your document.
c Press  Menu, 2, 2, 3.
d Enter the time you want the fax to be 
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM)
Press OK.
Note
The number of pages you can scan into 
the memory depends on the amount of 
data printed on each page.
 
Delayed batch transmission 5
Before sending the delayed faxes, your 
machine will help you economize by sorting 
all the faxes in the memory by destination and 
scheduled time.
All delayed faxes that are scheduled to be 
sent at the same time to the same fax number 
will be sent as one fax to save transmission 
time.
a Make sure you are in Fax mode  .
b Press  Menu, 2, 2, 4.
c Press a or b to choose On or Off.
Press OK.
d Press  Stop/Exit.