Ricoh SP 1200SF - Setting lock; Checking and cancelling waiting jobs

Chapter 4
28
Changing the Memory Security
password 4
a Press Menu, 1, 8, 1.
1.Mem Security
b Press a or b to select Set Password.
Press OK.
c Enter the registered four-digit password.
Press OK.
d Enter a four-digit number for the new
password.
Press OK.
e If the LCD shows Verify:, re-enter the
new password.
Press OK.
f Press Stop/Exit.
Setting lock 4
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, please call your dealer.
While Setting Lock is On, you cannot change
the following settings without a password:
 Date/Time
 Station ID
 Quick Dial settings
 Mode Timer
 Paper Type
 Paper Size
 Volume
 Auto Daylight
 Ecology
 LCD Contrast
 Setting Lock
 Dial Restriction
 Memory Security
Setting up the password 4
a Press Menu, 1, 8, 2.
b Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c Re-enter your password when the LCD
shows Verify:.
Press OK.
d Press Stop/Exit.