Polling
77
10
Sequential polling 10
Sequential polling lets you request
documents from several fax machines in one
operation.
a Make sure you are in Fax mode .
b (for EU and Asia/Oceania)
Press Menu, 2, 1, 8.
(for USA and Canada)
Press Menu, 2, 1, 7.
(for USA and Canada)
Go to e.
c (for EU and Asia/Oceania only)
Press a or b to choose Standard,
Secure or Timer.
Press OK.
d (for EU and Asia/Oceania only)
Choose one of the options below.
If you choose Standard go to e .
If you choose Secure, enter a four-
digit number, press OK, go to e.
If you chose Timer, enter the time
(in 24-hours format) you want to
begin polling and press OK, go to e.
e Specify the destination fax machines
you want to poll by using One Touch,
Speed Dial, Search, a Group or the dial
pad. You must press OK between each
location.
f Press Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is
dialling to cancel the polling process.
To cancel all sequential polling receive jobs,
press Menu, 2, 7. (See Checking and
cancelling waiting jobs on page 38.)
Polled transmit 10
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
Setup for polled transmit
(For EU, Asia and Oceania) 10
a Make sure you are in Fax mode .
b Load your document.
c Press Menu, 2, 2, 6.
d Press a or b to choose Standard.
Press OK.
e Press 2 to choose 2.No if you do not
want to enter more settings when the
LCD asks you the following message:
Next
1.Yes 2.No
f Press Start.
g If you are using the scanner glass, the
LCD will prompt you to choose one of
the options below:
Next Page?
1.Yes 2.No(Send)
Press 1 to send another page.
Go to h.
Press 2 or Start to store the
document.
h Place the next page on the scanner
glass, press OK. Repeat g and h for
each additional page.
Your machine will automatically store
the fax.
To Next Page
Loading...
