Chapter 2
10
Note
(For USA, Canada and Asia) For Legal
size paper, press the release button in the
bottom of the paper tray and then pull out
the back of the paper tray. (Legal size
paper is not available in some regions)
c Put paper in the tray, and make sure that
the paper is below the maximum paper
mark (1). The side to be printed on must
be face down.
CAUTION
To prevent damage to your machine
caused by paper misfeeding, make sure the
paper guides touch the sides of the paper.
d Put the paper tray firmly back in the
machine. Make sure that it is completely
inserted into the machine.
e Fold out the support flap (1) to prevent
paper from sliding off the face-down
output tray.
1
1
To Next Page
Loading...
