Ricoh SP 1200SF - Dialling and Storing Numbers; How to dial; Manual dialling; One touch dialling

Telephone and external devices
53
7
Note
You can switch it off temporarily, then turn
it back on. When you get a new fax
number, make sure you reset this
function.
• The machine will answer only calls to
the Distinctive Ringing number.
Note
After you have set the Distinctive Ring
feature to On, the receive mode is set to
Manual automatically. Unless you have a
TAD or Voice Mail set up on the Distinctive
Ring number, Manual mode means you
must answer all the call yourself. You can
not change the receive mode to the other
mode while the Distinctive Ring is set to
On.
Registering the Distinctive Ring
pattern 7
Very important!
After you have set the Distinctive Ring feature
to ON, the receive mode is set to Manual
automatically. Unless you have a TAD or
Voice Mail set up on the Distinctive Ring
number, Manual mode means you must
answer all the calls yourself. You can not
change the receive mode to another mode
while the Distinctive Ring is set to on.
a Press Menu, 2, 0, 2.
b Press a or b to choose On.
c Press OK.
d Press Stop/Exit. Distinctive Ring is
now set to on.
Turning off Distinctive Ring 7
a Press Menu, 2, 0, 2.
b Press a or b to choose Off.
c Press OK.
d Press Stop/Exit.
Note
If you turn off Distinctive Ring, the
machine will stay in Manual receive
mode. You will need to set the Receive
Mode again. (See Choosing the receive
mode on page 39.)