Ricoh SP204SF - System Settings

System Settings
Tray 1 Ppr Settings
Paper Size
Specifies the paper size.
Default:
(mainly Europe and Asia)
[A4]
(mainly North America)
[LT (8
1
/
2
× 11)]
• A4, B5 JIS, A5, B6 JIS, A6, LG (8
1
/
2
× 14),LT (8
1
/
2
× 11), HLT (5
1
/
2
× 8
1
/
2
), EXE
(7
1
/
4
× 10
1
/
2
), 16K (197 × 273mm), 16K (195 × 270mm), 16K (184 × 260mm),
Custom
Paper Type
Specifies the paper type.
Default: [Plain Paper]
• Plain Paper, Recycled Paper, Thick Paper, Thin Paper
Adjust Sound Volume
Specifies the volume of the sounds produced by the machine.
Select the setting for each item from [Off], [Low], [Middle], or [High].
Panel Key Sound
Specifies the volume of the beep sound when a key is pressed.
Default: [Middle]
Alarm Volume
Specifies the volume of the alarm sound when an operation error occurs.
Default: [Middle]
On Hook Mode
Specifies the volume of the sound from the speaker during On Hook mode.
Default: [Middle]
Copy Job End Tone
Specifies the volume of the beep sound when a copy job is complete.
Default: [Off]
Copy Job Error Tone
Specifies the volume of the beep sound when a copy job error occurs.
System Settings
123