4. Copying Originals
Copier Mode Screen
Standby mode screen
• First line:
Displays the function and paper size specified on the machine. The following five functions are
available:
• Copier, ID Card Copy, Sort, 2 Sided Copy, 2 Sided/Sort
• Second line:
Displays the copy magnification ratio or combine setting ([2 on 1] or [4 on 1]), document
type, and the number of copies.
Settings that can be specified for the current job
By pressing the [ ] or [ ] key in the Standby mode screen, you can specify the following settings
for the current job.
• Tray Paper Settings (paper size)
• Sort
• Original Type
• Density
• Reduce/Enlarge
• Combine
• 2 Sided Copy
• The start-up mode can be specified in the [Function Priority] setting under [System Settings].
• If paper is loaded in the bypass tray, the paper size specified in [Bypass Ppr Settings] appears
(except for Sort and 2 Sided Copy).
55
To Next Page
Loading...
