Ricoh SP204SF - Specifying the Scan Settings; Specifying the Scanning Size According to the Size of the Original; Adjusting Image Density

Specifying the Scan Settings
• To specify Scan to E-mail/FTP/Folder, be sure to specify the destination before configuring the
scan settings.
Specifying the Scanning Size According to the Size of the Original
1. Press the [Scanner] key.
CTT128
If you are using Scan to USB, proceed to Step 4.
2. Using the number keys, enter the number of a registered scan destination.
For details, see page 72 "Registering the Scan Destination".
3. Press the [OK] key.
4. Press the [
] or [ ] key to select [Original Size], and then press the [OK] key.
5. Press the [ ] or [ ] key to select the original size, and then press the [OK] key.
6. Press the [ ] key to return to the initial screen.
Adjusting Image Density
There are five image density levels. The higher the density level, the darker the scanned image.
Specifying the Scan Settings
77