• (Darkest)
Toner End Option
This setting is used to monitor the toner level.
Default: [Stop Printing]
• Stop Printing
Monitoring the toner level is enabled. The remaining toner level can be checked in the control
panel and on the Smart Organizing Monitor.
• Continue Printing
The machine no longer monitors the toner level. Even when the toner runs out, printing will
continue and no messages will be displayed.
• [Toner End Option] is not displayed for Type 3 models.
• For details about print cartridge and toner, see page 189 "Notes About the Toner".
Reset Settings
• Reset All Settings
Resets all settings to the factory default, except for the language, date and time, and fax
Speed Dialing settings.
• Clear Address Book
Deletes all fax speed dial entries.
7. Configuring the Machine Using the Control Panel
128
To Next Page
Loading...
Need help?
General
