Message Causes Solutions
RX Memory
Overflow
The memory has become full or
the maximum number of
receivable files has been
reached during fax reception.
• The received fax was too large. Ask
the sender to resend the document in
parts as several smaller individual
faxes, or to send at a lower
resolution.
• If an error has occurred because of a
problem such as lack of paper, paper
jamming, or toner running out, correct
the problem, and then finish printing
the outstanding files.
• If there is a file waiting to be sent,
complete the transmission or delete
the file.
Memory Data Lost
Data in the memory was deleted
due to a memory fault.
The machine prints Power Failure Report
and recovers from the error automatically.
Cancel Printing
I/O Timeout
The timeout period set in [I/O
Timeout] expires when printing
is frequently interrupted by data
from other ports, or when the
print job is large and takes time
for processing.
Set [I/O Timeout] to a larger value than
the current setting. For details, see
page 131 "Printer Features Settings".
Cannot Print
Memory Overflow
The data is too large or
complex to print.
Select [600 x 600dpi] in [Resolution:] to
reduce the size of data. For details, see the
Printer Driver Help.
Size Mismatch:
Tray1
Press Start or Stop
The specified paper size of the
file does not match that of the
paper loaded in Tray 1.
Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
If [Auto Continue] is set to [0 sec.], no error
message appears.
Size
Mismatch:Bypass
Press Start or Stop
The specified paper size of the
file does not match that of the
paper loaded in the bypass
tray.
Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
Error and Status Indicate on the Control Panel
181
To Next Page
Loading...
