4. Press the [ ] or [ ] key to select [Wi-Fi Connection], and then press the [OK] key.
5. Press the [ ] or [ ] key to select [802.11 Ad-Hoc Mode], and then press the [OK] key.
6. Enter the SSID, and then press the [OK] key.
The characters that can be used are ASCII 0x20-0x7e (32 characters).
7. Press the [
] or [ ] key to select the channel number, and then press the [OK] key.
8. Select the security method.
If you have selected [Open System - None], proceed to Step 13.
9. Press the [OK] key.
10. Select the key length, and then press the [OK] key.
11. Select the key format, and then press the [OK] key.
The maximum number of characters that can be entered in the password field depends on the [Key
Length] and [Key Format] settings. Specify settings in accordance with the following table:
Security Method Key Length Key Format
WEP Key
(Maximum character)
Open System - None
*1
- - -
Configuring Network Settings
25
To Next Page
Loading...
