5010e_513.doc / 22.01.10
Fig. 6.7 Fig. 6.7
Query of the desired method number, under
which the new method is to be stored. The
next free method number is indicated. How-
ever each free method number can be
selected within the range of 20 to 250.
[E] Store method with selected number. In
case of multi-standard method
Fig. 6.8
follows.
[ESC] Break storage and return to editor
menu
Fig. 6.8
For a method with multi-standard there is the
editor window for the curve bases.
[P+] and [P-] Consecutive numbering of the
current bases
[A/C] Switch input between A for absorbance
and C for concentration
[E] Accept the edited value
Input and confirmation of a single “0” at
A lead to the deletion of the current pair of
points. In order to set the value to zero enter
e.g. “0.0”.
[ESC] End input and save curve data
For measuring in a multi-standard
method at least 2 bases with A and C must be
defined!
METHOD NO.
NEXT FREE NO. xx
1 2 3 4 5 6 7 8
ESC 9 0 . + - E
CURVE NO. xx
P 1 A -00000 NEW A
C -00000
1 2 3 4 5 6 7 8
ESC 9 0 . P+ P-A/C E
ROBERT RIELE GmbH & Co KG Page 42 6 - METHOD EDITOR D EDITOR
To Next Page
Loading...
