Riello MULTI SENTRY Series - 3 Reference Standards

MULTI SENTRY
SPTMSTD2T16EREN
2
The MULTI SENTRY series consists of the following models:
MODEL
DESCRIPTION
MCT10/MST10
UPS 10 kVA input three-phase/output three-phase
MCT12/MST12
UPS 12 kVA input three-phase/output three-phase
MCT15/MST15
UPS 15 kVA input three-phase/output three-phase
MCT20/MST20
UPS 20 kVA input three-phase/output three-phase
MST30
UPS 30 kVA input three-phase/output three-phase
MST40
UPS 40 kVA input three-phase/output three-phase
MODEL
DESCRIPTION
MCM10/MSM10
UPS 10 kVA input single-phase - three-phase/output single-phase
MCM12/MSM12
UPS 12 kVA input single-phase - three-phase/output single-phase
MCM15/MSM15
UPS 15 kVA input single-phase - three-phase/output single-phase
MCM20/MSM20
UPS 20 kVA input single-phase - three-phase/output single-phase
The version 10÷20 kVA are available on compact cabinet (MCM/MCT) and cabinet 1320 x 440 x 850 mm
(MSM/MST), for optimazed solutions when average long-term autonomies are required.
3. REFERENCE STANDARDS
Riello UPS operates a Quality Management System certified to ISO 9001/2000 (Certification No. CERT-04116-99-
AQ-MIL-SINCERT) covering all company functions from design and manufacture to after sales services.
This certification is a guarantee for the customer with regard to the following aspects:
 use of quality materials;
 meticulousness in the production and testing phases;
 constant customer support.
In addition, the UPS meets the VFI-SS-111 classification (according to EN 62040-3) and complies with the following
specific standards for UPS:
 IEC EN62040-1: Static uninterruptible power supplies (UPS): general and safety provisions;
 IEC EN 62040-2: Electromagnetic compatibility (EMC) requirements category C2;
 EN 62040-3: Methods of specification of performances and test provisions;
The MULTI SENTRY series also satisfies the following general standards, where applicable:
 IEC 60529: Degree of protection provided by enclosures;
 IEC 60664: Insulation for low-voltage equipment;
 IEC 60755: General Requirements for Residual Current Operated Protective Devices;
 IEC 60950: General safety provisions for "Information Technology" equipment;
 IEC 61000-2-2: Electromagnetic compatibility immunity;
 IEC 61000-4-2: Electrostatic discharge immunity test;
 IEC 61000-4-3: Radio frequencies, electromagnetic immunity test;
 IEC 61000-4-4: Transitory overvoltage immunity test;
 IEC 61000-4-5: Overvoltage immunity test;
 IEC 61000-4-11: Voltage dips, short interruptions and voltage variations immunity test.
 IEC 61000-3-12: Harmonic current emissions (for equipment with rated current > 16 A ≤ 75).