European Directives:
LVD directive 2014/35/EU
The LVD covers all health and safety risks of electrical equipment operating with a voltage between 50 and 1000
V for alternating current and between 75 and 1500 V for direct current.
EMC directive 2014/30/EU
The EMC Directive limits electromagnetic emissions from equipment; The Directive also governs the immunity of
such equipment to interferences.
4. APPLICATIONS
MULTI SENTRY UPS are suitable for applications requiring critical load protection, from simple installation to those
most complex where the request of the reliability and maintainability is most required.
LAN, Server and Datacentre: the 0,9 output power factor ensures greater active power availability for efficient
UPS loading.
e-business and Telecommunications: parallel operation means that the installed UPS size can be increased (up
to 6 units) to keep pace with the growth of the organisation.
Industrial processes and electro-medical systems: the UPS is designed to protect a range of loads, from industrial
processes to electro-medical applications. This has been achieved through careful load analysis at the design
stage of the MULTI SENTRY project, to ensure the following characteristics:
Optimum input technical characteristics with zero impact on the power supply source.
High short circuit and overload capacity.
High battery recharge capacity with the option to use a variety of battery types (sealed valve
regulated and open-vented) for long back-up times.
To Next Page
Loading...
