58
REPAIRING A PUNCTURE
FITTING CHAIN AND INSTALLING WHEEL
• On bikes with derailleur or chain tensioner,
pull it backwards and set the chain to the
smallest sprocket.
• Insert the rear wheel into the dropouts.
• At E-bikes with enclosed drive you must
place the rear wheel as shown and set the
chain onto the sprocket.
REINSTALLING THE WHEEL
The following section covers the reinstalla
-
tion of wheels in all Riese & Müller E-bikes.
Please read the entire section dealing with
your specific bike. Essentially the installation
process is the reverse of the removal.
CASSETTE JOINT FIXING RING
For bicycles with Shimano gear hubs, the
shift ring must in place before the rear wheel
can be reinstalled. The mounting ring must
be locked by rotating clockwise. Note the po
-
sition of the colored dots and that the shifter
is in the in the first gear.
Source: Shimano techdocs
For assembling align the
yellow marks •
Cassette joint fixing ring
Cassette joint
To Next Page
Loading...
