RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
Figure 1-19
Sweep Waveform Signal in the Menu Display Mode
3. Press the Burst button, Burst for Sine, Square, Ramp, Pulse or Arbitrary waveform
can be generated (Noise can only be used in the gated Burst).
Figure 1-20
Burst Waveform Signal in the Menu Display Mode
Term Explanation
Burst：Output Waveforms with the set cycle times
Burst can last for certain times of waveform cycle (N-Cycle Burst) or be controlled by
external gated signals (Gated Burst). Burst applies to all kinds of waveforms, but
noise can only be used in gated burst.
To Next Page
Loading...
