RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
To Save Data
Users are allowed to store data document in any of the 10 Non-Volatile Memories. If
the place is already occupied, the new document will cover the old one. To save the
data, following the steps:
(1) Choose the file Type to store
Press Store/Recall State data, and choose “data” as the storage type.
(2) Choose the location of the file.
There are ten positions in the Local ARB1, ARB2……ARB10, choose one of them
by rotating the knob.
(3) Name the file and Save
Press Store button, enter the desired name. Press Store to finish.
To Next Page
Loading...
