Rigol DG1012 - Page 92

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG10× 2 Series
2-66
3. Set the Format
Press Utility  System  Format, enter the following interface.
Figure 2-70
Setting the data Format
Table 2-28 Setting the Data Format
Menu
Settings
Explanation
Decimal
Using dot
Using comma
Separat.
No
Close the Separate.
Space
Use Space to separate
On
Enable the Separate
According to the different choice of the decimal and the separate, the format can
have various forms:
(1) “ ” as decimal, press Separat.  On, the example is as follows:
Figure 2-71 Setting the data format
(2) “ ” as decimal, press Separat.  Space, the example is as follows:
Figure 2-72 Setting the data format