RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000B Series
Chapter 5 : Specifications
All specifications apply to the DS1000B Series Oscilloscopes and a probe with the
Attenuation switch set to 10X unless noted otherwise. To meet these specifications,
two conditions must first be met:
z The instrument must have been operating continuously for thirty minutes within
the specified operating temperature.
z Must perform the Self Calibration operation, accessible through the Utility menu,
if the operating temperature changes by more than 5ć.
z All specifications are guaranteed unless noted “typical”.
To Next Page
Loading...
