RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DS1000B Series
2. The horizontal
knob moves displayed signal horizontally
on the waveform window.
The horizontal
knob adjusts the trigger offset of signal, when turning
the knob; you can note that the waveform moves horizontally in conjunction with the
knob.
Horizontal offset back to 0 shortcut key
Press the knob to set the horizontal offset to 0 as a shortcut
key, this is especially helpful when the trigger point is far out of the screen and
want it to get back to the screen center immediately.
3. Press the MENU key to display the Time menu.
You can enter or exit the Delayed Scan mode, toggle the display mode among Y-T,
X-Y or ROLL mode, and turn the horizontal
knob to adjust trigger
offset.
Horizontal position control
Trig-Offset: Denotes the real position of the trigger point relative to the
midpoint of the memory. In this setting, the trigger position will be
changed horizontally when you turning the
knob.
To Next Page
Loading...
