Need help?Do you have a question about the Rinnai INFINITYREU-V3232W and is the answer not in the manual?
General| Brand | Rinnai |
|---|---|
| Model | INFINITYREU-V3232W |
| Category | Water Heater |
| Language | English |
Warning about high voltage inside the appliance.
Service work must be performed by authorized personnel.
Prohibition of open flames for gas leak detection.
Defines operating pressure and lists safety features.
Details specifications related to the combustion system.
Warnings against installing controllers near heat or in direct sunlight.
Cautions for outdoor mounting and metal wall grounding.
Step-by-step guide for wiring one or two controllers.
Instructions for wiring three remote controllers.
Procedure for connecting four standard controllers.
Diagnostic question for activating the fourth controller.
Question to determine specific programming needs based on appliance label.
Flow chart detailing the normal combustion sequence.
Flow chart for diagnosing miss-ignition and flame failure.
Flow chart for issues related to air supply or exhaust blockage.
Explains the ignition sequence and component activation.
Details how temperature and water flow are controlled.
Describes the shutdown sequence and fan purge operation.
Important warning regarding setting the unit to 95°C.
Table listing faults, codes, and troubleshooting steps.
Reference to the operational flow chart for diagnostics.
Table of normal electrical values for components.
Reference to the wiring diagram for troubleshooting.
Provides access to operational and fault history.
Detailed guides for checking components.
Information on component removal and replacement.
Lists controller error codes and associated fault descriptions.
Details actions and references for diagnosing faults.
Provides expected electrical values for components.
Procedures for checking the combustion fan circuit and motor.
Procedures for checking the sparker circuit and ignition.
Checks for the main solenoid valve (SV0).
Checks for Solenoid Valve 1 (SV1).
Checks for Solenoid Valve 2 (SV2).
Safety warning before adjusting gas pressure.
Warning regarding pressure testing procedures and gas shut-off.
Safety warning for performing gas conversion.
Safety warning about electrical exposure during dismantling.
Lists essential precautions before starting dismantling.
To Next Page