Risco LightSYS 2 Series User Manual

InstallerProgramming
Page 105
Quick Keys Parameter Default Range
 
AtArm

Setthesoundproducedwhenasystemʹszonetriggersanalarmwhile
thesystemisarmedinAway.
 
AtStay

Setthesoundproducedwhenasystemʹszonetriggersanalarmwhile
thesystemisarmedinSTAY.
 
AtDisarm

Setthesoundproducedwhenasystemʹszonetriggersanalarmwhile
thesystemisDisarmed.
 
Termination 
TheTerminationmenuenablesyoutoprogramtheconnectiontype
usedforeachofthesystemʹszones.Theactual(physical)terminationfor
eachzonemustcomplywiththatselectedinthezoneterminationmenu

N/C

Usesnormally‐closedcontactsandnoterminatingEnd‐of‐LineResistor

EOL

Usesnormally‐closed(NC)and/ornormally‐open(NO)contactsina
zoneterminatedbyEnd‐of‐LineResistor.

DEOL

Usesnormally‐closed(NC)contactsinazoneusingEnd‐of‐Line
Resistorstodistinguishbetweenalarmsandtamperconditions.

N/O

Usesnormally‐opencontactsandnoterminatingEnd‐of‐LineResistor.

Risco LightSYS 2 Series Specifications

General

Control Panel Type	Hybrid
Operating Temperature	-10°C to 55°C
Outputs	4
Communication	PSTN, GSM, IP
Wireless Frequency	868MHz
Programming	Via keypad
Backup Battery	12V, 7Ah
Remote Management	Yes
Humidity	Up to 93% non-condensing